This is window 4 of the ALU wizard. This window contains the following items.
| Carry Enable | The box contains an X if The ALU is to have a Carry Enable input. It must be blank otherwise. Click to change. |
| Carry Enable Name | Carry Enable Signal name. This box appears only if Carry Enable contains an X and Control Bus (see window 3) is set to Yes. |
| Carry In | The box contains an X if The ALU is to have a Carry In input. It must be blank otherwise. Click to change. |
| Carry In Name | Carry In Signal name. This box appears only if Carry In contains an X and Control Bus (see window 3) is set to Yes. |
| Carry Out | The box contains an X if The ALU is to have a Carry Out status output. It must be blank otherwise. Click to change. |
| Carry Out Name | Carry Out Signal name. This box appears only if Carry out contains an X. |
| All Zero | The box contains an X if The ALU is to have an all zeros status output. It must be blank otherwise. Click to change. |
| All Zero Name | All Zero Signal name. This box appears only if All Zero contains an X. |
| All One | The box contains an X if The ALU is to have an all-ones status output. It must be blank otherwise. Click to change. |
| All One Name | All One Signal name. This box appears only if All One contains an X. |
| Finish | Create the ALU using the information provided so far, and copy it to the clipboard. |
| Cancel | Exit the wizard without making changes. |
| Next | Display ALU Wizard window number 5. |
| Back | Display ALU Wizard window number 3. |