The third window of the counter wizard contains the following items.
| Load Signal Name | The name of the single-bit Load signal. This box appears only if Include Data Inputs from window 2 contains an X. |
| Clock | Contains an X if the counter is clocked. Click to change. |
| Clock Signal Name | Appears only if Clock contains an X. The name of the single-bit clock input. |
| Count Down | Contains an X if the counter has a count down input. Click to change. |
| Count Down Signal Name | Appears only if Count Down contains an X. The name of the single-bit count down input. |
| Count Up | Contains an X if the counter has a count up input. Click to change. |
| Count Up Signal Name | Appears only if Count Up contains an X. The name of the single-bit count up input. |
| Set | Contains an X if the counter has a set input. Click to change. |
| Set Signal Name | Appears only if Set contains an X. The name of the single-bit set input. |
| Clear | Contains an X if the counter has a clear input. Click to change. |
| Clear Signal Name | Appears only if Clear contains an X. The name of the single-bit clear input. |
| Finish | Create the counter definition and copy it to the clipboard |
| Cancel | Exit the wizard without making any changes. |
| Next | Go to Counter Wizard window 4 |
| Back | Go to Counter Wizard window 2 |