Window number 3 of the Register Wizard contains the following items.
| Load Signal Name | The name of the single-bit load signal (required). |
| Clock | Contains an X if the register is clocked. Click to Change. |
| Clock Signal Name | Appears only if Clock contains an X. This is the name of the single bit clock input. |
| Left Shift | Contains an X if the register has a left shift control. Click to Change. |
| Left Shift Name | Appears only if Left Shift contains an X. This is the name of the single bit left-shift control signal. |
| Right Shift | Contains an X if the register has a right shift control. Click to Change. |
| Right Shift Name | Appears only if Right Shift contains an X. This is the name of the single bit right shift control signal. |
| Set | Contains an X if the register has a set control. Click to Change |
| Set Signal Name | Appears only if Set contains an X. This is the name of the single bit set input. |
| Clear | Contains an X if the register has a clear control. Click to Change |
| Clear Signal Name | Appears only if Clear contains an X. This is the name of the single bit clear input. |
| Finish | Create the register and copy it to the clipboard. |
| Cancel | Close the wizard with no changes. |
| Next | Go to Wizard window 2 |
| Back | Go to Wizard window 4 |